TechnoKom AutoGRAPH-INFO-TFT Operation & User’s Manual

57, AutoGRAPH-INFO-TFT • USER MANUAL 57 TechnoKom © 2016 Set up mode of digital inputs To set up the device digital inputs, select Main menu/Settings/Control menu/Input, then enable or disable special features of the inputs: • Input 1 (consump.) – the option enables r…

39, AutoGRAPH-INFO-TFT • USER MANUAL 39 TechnoKom © 2016 Fig.47. Incoming message. You can open the incoming messages menu also by selecting Main menu/Messages/ Incoming messages. AutoGRAPH-INFO-TFT can store up to 30 messages in memory using the ring buffer principle. It mean…

31, AutoGRAPH-INFO-TFT • USER MANUAL 31 TechnoKom © 2016 Fig.35. Copy photos from FLASH memory. Photo recording AutoGRAPH-INFO-TFT scans cameras every ve minutes. If at least one camera is failed, the display noties a user using sound signal then records a log. Therefore, if AutoG…

46, AutoGRAPH-INFO-TFT • USER MANUAL 46 TechnoKom © 2016 Fig.55. The last photo on the main screen. Fueller This mode is intended to display data received from the AGFC fuel dispensing controller connected via RS-485 bus. The AGFC controller is a device produced by TechnoKom…

65, AutoGRAPH-INFO-TFT • USER MANUAL 65 TechnoKom © 2016 Appendix 3 Given below is the list of parameters which are supported by the AutoGRAPH-INFO-TFT and can be displayed on the device main screen. The list of parameters is set up in the DisplayCongu…

19, TechnoKom AutoGRAPH-INFO-TFT AutoGRAPH-INFO-TFT • USER MANUAL 19 TechnoKom © 2016 AutoGRAPH-INFO-TFT configuration tool Using the DisplayCongure software, you can set up AutoGRAPH-INFO-TFT. This software allows you to congure the display for operation with external devices, edit templates…