Data: UPD 13th December 2023
Audiovox DVDMP Racks & Stands PDF Installation Instructions (Updated: Wednesday 13th of December 2023 07:17:08 PM)
Rating: 4.8 (rated by 25 users)
Compatible devices: LPA19-444, 00106355, CCDFR, 38-817001-01 Series, VOHBKT, VPMP1, 3150, DBLIFT-0019.
Recommended Documentation:
Text Version of Audiovox DVDMP Racks & Stands Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 13 December 2023)
INSTALLATION INSTRUCTIONS
DVDMP
DIGITAL VIDEO DISC MOUNTING PLATE
TOOLS REQUIRED:
1. Power Screw Gun or Drill
2. ¼” Nut Driver Attachment for Screw Gun
INSTALLATION:
1. Locate a flat surface in vehicle. *Depending on vehicle, the surface can be under a seat,
rear cargo area if Sport Utility Vehicle, or trunk of passenger car.
2. Take notice of any obstacles under mounting surface, such as a harness under a rug, fuel
lines, or a fuel tank under the vehicle that might be damaged by mounting of DVDMP.
3. After locating an area to mount plate, place DVDMP down on location and align the plate
so there is one mounting hole located in the front and 2 mounting holes in the rear.
4. Using Screw Gun and Nut Driver Attachment, secure DVDMP with one washer and one
screw in each mounting hole. Tighten down all 3 screws.
5. Re-check area under mounting plate to confirm mounting screws did not damage any
components under the plate.
6. Route LED Repeater wire under the DVD, making sure wire does not get pinched.
7. Remove adhesive backing from the adjustable, beveled repeater cup.
8. Place LED repeater in adjustable cup, making sure LED repeater is secured to adhesive
pad.
9. Place DVD on plate and align LED repeater with IR window on DVD unit.
10.Install wiring to DVD as noted in Instruction Manual included with DVD unit.
11. Secure DVD by connecting the two ends of plastic strap. Pull loose end of strap to
tighten down unit securely into mounting plate.
© 2000 Audiovox Corporation, Hauppauge NY 11788 128-5841
Recommended:
TRS 4000, 100 Series, ZyXEL ZyAIR B-220, WBVH6240H
STV-116, RACK-305G, 585, VVX 400, TY-S37PX70WK
-
EN Read the entire instruction manual before you start installation and assemьty. lf you have апу questions regarding апу of the instructions ог warnings, please contact your local distributor for assistance. CAUТION: Use with products heavier than the rated weights indicated ...
Model & Doc Type: NP25 2
-
Universal Stand Installation Guide 1 Package Contents Please verify that you received the following items with your package content. BM05911: Universal Stand (Small Size) Stand Package Small Size Stand □ 2PCS Thumb Screw □ 4PCS Tube Package Small Size Tube □ 2PCS M4xL35 Sc ...
Model & Doc Type: BM05911 4
-
Vis-i-Rack VRW46/VRW85 High Capacity Roll Storage Rack Installation Instructions Part# Description Qty Tools required for assembly: Phillips screwdriver 1 End Cap 4 2 Frame Assembly 2 3 Wall Brace 2 4 Mounting Plate 2 5 Nylon Nuts 4 6 Flat Washers 6 7 Short Mounting Plate ...
Model & Doc Type: Vis-i-Rack VRW46 3
-
� ...
Model & Doc Type: MAGICMOUNT PRO MPWDB 2
Operating Impressions, Questions and Answers:
