ROFU 8035 Installation Manual

10, NOTICE: For Vertical Installation Change the spring which is provided in the screwpack. ROFU Security International Corp. 10029 South Tacoma Way, E-11 Lakewood, WA 98499 USA www.rofu.com / 1-800-255-7638 …

4, Full Dimension Magnet Assembly Armature Assembly Side View Magnet Assembly A rmature Assembly 7.09” (180mm) 1.06” (27mm) 0.91” (23mm) 1.06” (27mm) 0.91” (23mm) 6.46” (164mm) 6.46” (164mm) 7.09” (180mm) 6.46” (164mm) 7.09” (180mm) 0.63” (16mm) 1.18” (30mm) 0.63…

5, TECHNICAL SPECIFICATION VOLTAGE 12VDC / 24VDC Selectable via jumpers + 10% over voltage is acceptable Under voltage will reduce holding force 24 VOLT JUMPER SETTI N G 12 VOLT JUMPER SETTI N G CURRENT CONSUMPTION 350mA @ 12VDC 190mA @ 24VDC The unit does not require an init…

9, ROFU 8035 FULL GLASS DOOR INSTALLATION (NOT VERIFIED BY UL) The unit may also be fitted to a full glass door and glass frame application, using 2pcs of the 21036 housing and 2pcs of the 21037 U-brackets. The housing holding the magnet should be clapped above the door and the housing holding the …

7, SEMI-FLUSH INSTALLATION The unit may also be fitted semi-flush with the use of the 21036 housing. The magnet should be fitted to the door transom and the housing holding the armature on to the door. It is vital that a minimum gap of 1/16” (2mm) exists between the magnet and the armature, …