microHAM SMORF Manual 

7, microHAM © 2015 All rights reserved Rear Panel 1. SENSOR 1 FORWARD (FWD) or VOLTAGE (U) SAMPLE INPUT ◦ FWD/U connection port of SENSOR 1 ◦ serves as INPUT 1 in 4 INPUT mode 2. SENSOR 1 REFLECTED (REF) or CURRENT (I) SAMPLE INPUT ◦ REF/I connection port of SENSOR 1 ◦ serves as INPUT 2…

49, microHAM © 2015 All rights reserved 11 – SENSOR 1 MENU SENSOR 1 MENU is a sub menu of the MAIN MENU and serves for all sensor related settings. Actually there are two sub menus, SENSOR 1 MENU and SENSOR 2 MENU but since both have same sub-menus and settings, and only difference is that…

9, microHAM © 2015 All rights reserved 5 – OPERATION Operating SMΩRF is easy and intuitive, but to use it effectively and to maximal pleasure, it is important to understand its structure and relationship between data and settings. SENSOR SELECTION First basic selection on SMΩRF is a SENSOR …

10, microHAM © 2015 All rights reserved multiplier is indicated by flashing x100 indicator. Bottom power reading scale is shortened to half. Final value is given by multiplying indicated value on the current scale by RANGE multiplier. Current scale on TOP bar is indicated by one of SCALE in…

29, microHAM © 2015 All rights reserved SPECTRUM SCREEN Spectrum screen is similar screen to the Oscilloscope screen but visualizes data in the frequency domain instead of oscilloscope's time domain. It uses SMΩRF's peak detector data and with help of Digital Signal Processing…

6, microHAM SMORF microHAM © 2015 All rights reserved Front Panel 1. TOP BAR GRAPH 2. BOTTOM BAR GRAPH 3. TOP BAR GRAPH SCALE INDICATOR 4. BOTTOM BAR GRAPH SCALE INDICATOR 5. BAR GRAPH SCALE RANGE INDICATOR ◦ green color indicates top bar graph range ◦ red color indicates bottom bar graph ra…