Nicol Scales & Measurement LoadRunner Series Installation & Service Manual

12, Roll Off Load Pin Installation 7 9. Using grease, lubricate the hole and insert the load pin into the frame ensuring the strain gauge seals are facing toward the front of the truck. The load pins have arrows indicating the downward force, or direction of load applied to register a positive weig…

8, Load Pin and Transducer Specification 3 2.0 Load Pin and Transducer Specification The Rice Lake Roll Off and Dump Truck kits are typically LIFT-TO-WEIGH KITS. This means that with the hoist in the relaxed state (on the chassis), no weight reading is available. The hoist needs to be elevated to a …

22, Configuration and Calibration 17 4.3 Configuration of Count By The count by value in the division size, in lbs, that the scale will increment by on the display. 1. Use or to scroll to Option. Press (OK). 2. Use or to scroll to Count. Press (OK). 3. Use or to scroll to the Coun…

7, Nicol Scales & Measurement LoadRunner Series 2 LoadRunner™ Series Installation & Service Manual 1.0 Considerations Before Installation W ARNING Failure to observe these recommendations and instructions could result in a hazardous  operating condition. This manual is intended to provide information for the mounting of Onbo…

25, 20 LoadRunner™ Series Installation & Service Manual 4.7.4 Full Span (Net Load) Calibration lb lb lb lb lb lb 1. Load vehicle to its legal max, record GROSS weight. 2. Weigh and record the TARE (empty) vehicle. 3. Subtract the TARE weight from the GROSS weight to give  …