Ocean Systems dTective Manual 

11, 11 Step 4: Connecting Composite cable to OUTPUT on TBC Take a second Composite cable (with converter) and connect it to any of the four RCA outputs on the rear of the TBC Connect Composite cable to any of the four outputs Step 5: Connecting Composite cable to INPUT on the Break Out B…

5, 5 Step 5: Connecting S-Video cable to INPUT on the Break Out Box Take the cable that you just connected from the output of the TBC and connect the other end to the S-Video INPUT on the rear of the Avid Break Out Box. Connect S-Video cable from TBC OUT to S-Video IN on BOB Step 6…

16, 16 Step 2: Connect the XLR to RCA Converters to the Speaker Tap Connect the XLR to RCA Converters to the Male XLR connections on the Speaker Tap as shown below. Step 3: Connect the RCA Cable to Converters Connect the RCA cable to the XLR converters on the Speaker Tap as shown below. Step…

6, Ocean Systems dTective 6 Step 7: Connecting your NTSC Monitor (TV) You need to determine if your television monitor uses a BNC connector or an RCA connector. Take a look at the images below to determine what you have. You will use either of these type of connectors, but not both. BNC Input: R…

4, 4 Step 3: Connecting S-Video cable to INPUT on TBC Take the cable that you just connected to the rear of the deck and connect the other end of it to the S-Video INPUT on the front of the TBC (out from deck to TBC input). Step 4: Connecting S-Video cable to OUTPUT on TBC Take …