Nexo Digital TDcontroller Series Operation & User’s Manual

6, Nexo Digital TDcontroller Series CONNECTING THE SPEAKERS • “XO” (Crossover) means the Main outputs are high-pass typically for use with sub. Advanced settings are set to default. • The “User” position is used for advanced settings (patch, delay, EQs, user limiter) set up from Nexo Dory remote control softw…

8, DRAWINGS AND DIMENSIONS PAGE 8 OF 16 Drawings and dimensions DTD-T model Always connect to amplifiers outputs 1+/1- LEFT channel / 2+/2- RIGHT channel MADE IN FRANCE 90-240V~ 50/60 Hz 20W SUB AMP IN MAIN AMP IN AES/EBU IN MAIN LEFT OUT MAIN RIGHT OUT SUB MONO OUT SPEE…

3, IMPORTANT NOTICE FOR THE UNITED KINGDOM Location • Before moving the device, remove all connected cables. • When setting up the device, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power …

11, PRÉSENTATION DU DTD CONTROLLER Présentation du DTD Controller Bienvenue dans le manuel du DTD Controller. Veuillez prendre le temps de le lire afin d’apprendre comment configurer l’appareil. Le DTD (Digital Temperature and Displacement) Controller est un contrôleur de haut-p…

15, SCHÉMAS ET DIMENSIONS Schémas et dimensions Modèle DTD-T Always connect to amplifiers outputs 1+/1- LEFT channel / 2+/2- RIGHT channel MADE IN FRANCE 90-240V~ 50/60 Hz 20W SUB AMP IN MAIN AMP IN AES/EBU IN MAIN LEFT OUT MAIN RIGHT OUT SUB MONO OUT SPEED LINK / ACT BALANCED…

14, CARACTÉRISTIQUES Caractéristiques DTD-T-U DTD-T-N DTD-I-U DTD-I-N Caractéristiques Audio Fréquence d’échantillonnage et résolution 48/96 kHz, résolution des traitements internes 64 bits Latence < 1 ms (entrée analogique vers sortie) en configuration ‘Fla…