IAI AP-1600T-PMCL Operation & User’s Manual

39, — 39 — AP-1600T-PMCL ■ When [ExposureMode] is [TriggerWidth] Example: When [TriggerSource] is set to [Line 5 - Optical In 1] and [OptInFilterSelector] is set to [10 µs] • TriggerOverlap: Off A B (= Height x Line Period) C D FVAL CMOS Exposure Trigger Exposure Active Next trigger disable…

28, IAI AP-1600T-PMCL ■ ClConfiguration Medium / PixelFormat RGB12 ・・・ ・・・ ・ ・ 16 13 14 15 16 13 14 15 1612 13 14 15 7 8 9 10 11 12 7 8 9 10 11 12 7 8 9 10 11 Connector1 Connector2 1 1 PortA PortB PortC PortD 43 51 2 PortF PortE 6 6 4 4 5 5 2 2 3 3 6 Port / bit 36-bit RGB Port / bit 36-bit RGB Port …

68, — 68 — AP-1600T-PMCL Miscellaneous Troubleshooting Check the following before requesting help. If the problem persists, contact your local JAI distributor. ■ Power supply and connections Problem Cause and solution The POWER/TRIG LED remains lit amber and does not turn green, even…

5, — 5 — Notes on attaching the lens Usage Precautions AP-1600T-PMCL Notes on Camera Link cable connections Secure the locking screws on the connector manually, and do not use a driver. Do not secure the screws too tightly. Doing so may wear down the screw threads on the camera. (Tighten…

58, — 58 — AP-1600T-PMCL Item Setting range Default value Description BinningHorizontal 1, 2 1 Set the number of pixels in the horizontal direction for which to perform binning. BinningVerticalMode Sum Sum Display the addition process to be used during vertical binning. BinningVertical 1,…

57, — 57 — AP-1600T-PMCL Settings List Feature Properties : Settings that can only be configured when image acquisition on the camera is stopped. Item Setting range Default value Description a) DeviceControl Display/configure information related to the device. DeviceVendorName – &…