Full Boar FBT-0700 Instruction Manual

8, 8 SET-UP & PREPARATION WARNING! Ensure the tool is turned off and disconnected from the power supply before performing any of the following operations. Using the Depth Rod The Full Boar FBT-0700 comes with a depth rod that allows you to drill to a predetermined depth. 1. Loosen the …

4, 4 Congratulations on purchasing a Full Boar Rotary Hammer. Your Full Boar Rotary Hammer Drill Kit FBT-0700 has been designed to rapidly drill, chip, chisel and break masonry products such as concrete. Read and understand the Owner’s Manual before operating the rotary hammer. Failure to d…

16, 16 WARRANTY EXCLUSIONS The following actions will result in the warranty being void. If the tool has been operated on a supply voltage other than that specified on the tool.• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents • or alterat…

10, 10 1. Ensure your workpiece is securely clamped where possible. 2. Connect the tool to the mains power supply. The ready for use indicator LED will illuminate when the tool is connected to power and ready for use (Fig. 5). 3. Select the desired mode of operation (refer to Choosing an Op…

11, Full Boar FBT-0700 11 MAINTENANCE •Keeptheventilationventsoftherotaryhammerdrillcleanatalltimes. •Aftereachuse,blowairthroughtherotaryhammerdrillhousingtoensureitisfree from all dust particles which may…