Jinbei HD601 Operating Instructions Manual

10, Once the soft box is firmly assembled it can be placed onto the monolight. DO NOT TRY TO ASSEMBLE SOFTBOX TO MONOLIGHT ON A STAND. Please be careful in attaching the soft box to the monolight. Remember it is a bayonet mount that requires a slight twist .Carefully align the lugs on the so…

7, Monolights should always have the protective cover over the flash tube whenever the lights are not in use. Flashtubes are delicate and expensive so please be careful when removing and replacing the flash tube covers. Allow lights to cool for a few minutes before fitting protecti…

6, When you attach a monolight to the stand please ensure that the brass attachment at the top of the stand is completely hidden from view (apart from the knurled section at the very bottom). You may need to ‘jiggle’ the head into position or undo the locking screw on the monolight …

11, The inner diffusers have tabs as per our image above. The outer diffusers do not have tabs but continuous Velcro around the edges which attaches to the Velcro edges of the softboxes. Here’s a hint for fitting the diffusers. Start at the top of the soft box unless you like making t…

3, If you are not familiar with the operation of our Jinbei lights, please READ THIS MANUAL CAREFULLY before attempting to use the lights. Just need a refresher in how to use them? Here’s a summary • Set up the stands • Set up the softbox(s) • Attach the monolight)s) to the softb…

9, Jinbei HD601 Pushing the hub down will eventually engage the lock. Again, be careful doing this as it can bite. Don’t say you haven’t been warned. With the lock engaged the soft box should look like this. The fabric should be taut. This is the 90cm Deep Softbox but the 120 cm softboxes will …