Hirschmann RS20 Reference Manual

135, Hirschmann RS20 Diagnosis RM Web L2E Release 5.0 04/09 7.3 Topology Discovery 135 X devices without active topology discovery function are connected to a port, the topology table hides the devices without active topology discovery. If X only devices without active topology discovery are …

125, Redundancy RM Web L2E Release 5.0 04/09 6.3 Rapid Spanning Tree 125 Figure 37: RSTP Global dialog 6.3.2 Rapid Spanning Tree Port Note: Deactivate the Spanning Tree protocol on the ports connected to a HIPER-Ring or a Fast HIPER-Ring, because the Spanning Tree and the Ring Redundancy affe…

77, Switching RM Web L2E Release 5.0 04/09 4.4 Multicasts 77 The parameters – Max. Response Time, – Send Interval and – Group Membership Interval have a relationship to each other: Max. Response Time < Send Interval < Group Membership Interval. If you enter …

116, Redundancy 116 6.2 Ring/Network coupling RM Web L2E Release 5.0 04/09 The following tables show the selection options and default settings for the ports used in the Ring/Network coupling. Redundancy Mode With the “Redundant Ring/Network Coupling” setting, either the ma…

141, Diagnosis RM Web L2E Release 5.0 04/09 7.6 Signal contact 141  In the “Mode Signal contact” field, you select the “Monitoring correct op- eration” mode. In this mode the signal contacts monitor the functions of the device, thus enabling remote diagnosis. A break in contact is rep…

41, Security RM Web L2E Release 5.0 04/09 2.2 SNMPv1/v2 Access Settings 41 X In the "Access Mode" column, you specify whether this computer can access the device with the read password or with the read/write pass- word. X You can activate/deactivate this table entry in the "Activ…