HiLook IPC-D640H-Z Quick Start Manual

17, Network Dome Camera·Quick Start Guide 17 17 2.1.2 Memory Card Installation Steps: 1. Rotate the camera body to completely expose the memory card slot. 2. Insert the memory card into the memory card slot, and push to get it mounted. Memory Card Install the Memor…

32, HiLook IPC-D640H-Z Network Dome Camera·Quick Start Guide 32 32 Modify the IP Address Figure 3-5 Note: You can enable the Hik-Connect service for the device during activation. Refer to Chapter 5.1 for detailed information. 4. Input the admin password and click Modify to activate your IP address modifi…

38, Network Dome Camera·Quick Start Guide 38 38 Steps: 1. Access the camera via web browser. Refer to Chapter 4. 2. Enter platform access configuration interface: Configuration > Network > Advanced Settings > Platform Access. Platform Access Configuration (Web) F…

21, Network Dome Camera·Quick Start Guide 21 21 2. Route the cables through the side outlet to the conduit. 3. Align and rotate the conduit clockwise to the side outlet tightly. Conduit Install the Conduit to the Camera Figure 2-7 Note: For wall mounting, position the side outlet …

37, Network Dome Camera·Quick Start Guide 37 37 Verification Code Setting (SADP) Figure 5-1 Note: The verification code is required when you add the camera to Hik-Connect app. 3. Click and read "Terms of Service" and "Privacy Policy". 4. Confirm the se…

36, Network Dome Camera·Quick Start Guide 36 36 5 Operate via Hik-Connect App Purpose: Hik-Connect is an application for mobile devices. With the App, you can view live image of the camera, receive alarm notification and so on. Note: Hik-Connect service is not support…