Janssens Victorian Vi-34 Assembly Instructions Manual

21, Note: Glazing shims are now supplied to further strengthen the structure. Install the glass panels then fix the shims to either side of the glass with a dab of silicon. Then install the rubber trim. Polycarbonate units will not use these shims. Glazing Shim Installation Note: Gla…

34, Spindle Opener (If Equipped) Insert a 1 inch long bolt in the lower roof window profile. Slide it to the center and lock it in place with a nut as shown below. Next hold the lower U-shaped mount up to the crossbar and mark the center of one hole. Use a 1/8th inch drill bit and drill th…

27, Double Sliding Door Note: Apply upwards pressure when installing the door support(in red). Note: Use washer underneath door hanger to level the door if needed. Add L bracket to close the gap between the doors when they meet. …

4, Top Shelf Top/Bottom profile of sliding door Curtain Rail Side Profile Turning Door Horizontal Profile Turning Door Side profile Turning Door Hanger for Sliding Door Vertical Glazing Bar Gable Profile Bottom guide for sliding door Rubber Gasket Roof Glass Support pieces …

40, Janssens Victorian Vi-34 Janssens NV Mechelsesteenweg 388, B-2500 Lier Belgium (T) +32 15 30 67 80 (W) www.janssens-alusystems.be (E) [email protected] Customer Service or Assembly Questions? Give us a call Toll free: 1-877-760-8500 [email protected] Exaco Trading www.EXACO.com …