Litex Industries CC42BB4L Installation Manual

1, Installation Guide For Models: CC42BB4L CC42WW4L net weight of fan: 9.47 lb. (4.3 kg) PRINTED IN CHINA Table of Contents: Safety Tips. pg. 1 Unpacking Your Fan. pg. 2 Parts Inventory. pg. 2 Installation Preparation. pg. 3 Hanging Bracket Installation. pg. 3 Preparation for Wiring. pg…

4, 4. Hanging Bracket Installation. page 3 hanging bracket spring washers ON OFF ON OFF 3. Installation Preparation. To prevent personal injury and damage, ensure that the hanging location allows the blades a clearance of 7ft. (2.13m) from the floor and 30in. (76cm) from any wall or ob…

8, Litex Industries CC42BB4L page 7 10. Light Assembly. (cont.) 11. Testing Your Fan. It is recommended that you test fan before finalizing installation. Restore power from circuit box and wall switch. Test fan speeds with the pull chain to the left of the reverse switch. Start at the OFF position (no blade movement). F…

5, page 4 Remove 1 motor mounting screw from hook end of motor assembly. Remove the other 2 motor mounting screws from hanging bracket. Save motor mounting screws for later use. Lift motor assembly to hanging bracket and slide hook end (with single screw hole) into square openin…

2, SAFETY TIPS. page 1 WARNING: To reduce the risk of electrical shock, turn off the electricity to the fan at the main fuse box or circuit panel before you begin the fan installation or before servicing the fan or installing accessories. 1. READ ALL INSTRUCTIONS AND SAFET…