LeakTronics LT1000 Manual 

1, Phone: 818-436-2953 / www.leaktronics.com / [email protected] LT1000 Noise Reducing Metered Amp TABLE OF CONTENTS 1. Safety and Care 2. LT1000 Noise Reducing Metered Amp 3. Specifications 4. Battery Installation and Type 5. Power On/Off, LED Display 6. Mute 7. Meter Null/Sensitivity…

2, Safety and Care ***PLEASE NOTE: USE CAUTION WHEN PRESSURE TESTING. NEVER INFLATE TO MORE THAN 15 PSI. DO NOT STAND IN FRONT OR ABOVE A COMPRESSION PLUG OR ANY PLUG WHEN UNDER PRESSURE. ***PLEASE NOTE: IT IS EXTREMELY IMPORTANT TO ALWAYS TURN DOWN THE VOLUME, REMOVE HEADPHONES OR USE M…

3, Important Information and Introduction for the LT1000™ Noise Reducing Metered Amp (Requires 2 AA batteries) Thank you for purchasing your new LT1000. The only state of the art amp made specifically for the leak detection industry. The LT1000 can be used in conjunction with the S…

4, Power • Batteries: 2x AA battery. • Minimum voltage: 2.25V. • Run Time: Better than 8 hours. • Change batteries with #2 Phillips screwdriver ***PLEASE NOTE: Mute button MUST be in off position (down) when powering LT1000 amplifier on. Battery installation and type: We h…

5, LeakTronics LT1000 get a noise baseline (high). Turning the sensitivity switch on (up) will allow for a higher and lower range. Volume Turn to the right to increase volume, turn to left to decrease. Always be sure to turn the volume on the amplifier to the left (lowest setting) prior to each use or to pow…