Leadshine Technology DM422C Operation & User’s Manual

6, Leadshine Technology DM422C DM422C Digital Stepping Driver Manual V1.0 Tel: +000 0000-00000000 7 Figure 6: 6-lead motor full coil (higher torque) connections Connections to 8-lead Motors 8 lead motors offer a high degree of flexibility to the system designer in that they may be connected in series or parallel, thus satis…

3, DM422C Microstepping Driver Manual V1.0 Tel: +000 0000-00000000 1 1. Introduction, Features and Applications Introduction The DM422C is a versatility fully digital stepping Drive based on a DSP with advanced control algorithm. The DM422C is the next generation of digital stepping motor controls…

14, DM422C Digital Stepping Driver Manual V1.0 Tel: +000 0000-00000000 23 Figure 24: Finish tuning and save setting to the Drive Notes: However, if the user does not want to tune the current loop after changing a different stepping motor, then Motor self-test and parameter auto-setup…

8, DM422C Digital Stepping Driver Manual V1.0 Tel: +000 0000-00000000 11  To prevent noise incurred in PUL/DIR signal, pulse/direction signal wires and motor wires should not be tied up together. It is better to separate them by at least 10 cm, otherwise the disturbing signals generated by moto…

7, DM422C Digital Stepping Driver Manual V1.0 Tel: +000 0000-00000000 9 it may also cause over-voltage protection or even Drive damage. Therefore, it is suggested to choose only sufficiently high supply voltage for intended applications, and it is suggested to use power supplies with theor…