AUSTRALIAN MONITOR AMPAV40 Installation And Operation Manual

7, The AMPAV40 speaker is turned on from the mains switch at the rear of the unit. Once activated, the remote control can then be used to operate the speaker remotely including setting the speaker system to standby mode when not in use. 1 ON This command will turn the unit on when in sta…

5, The AMPAV40 has a number of functions and input options which may be selected from the active speaker’s rear panel or from the supplied remote control. 1 CONTROL Power: A power LED indicator on the control panel segment indicates when power is on (red) or when the system is…

11, SPECIFICATIONS AMPAV40 Speaker system 3-Way Active Speaker 3-Way Passive Speaker Power (Continuous) 2 x 20 Watts Impedance 4 Ohms Sensitivity (1 W / 1 M) 88 dB Calculated max SPL (per speaker) 101 dB Frequency Response (-3 dB) 45 Hz – 20 kHz Frequency Response (-10 dB) 40 H…

6, AUSTRALIAN MONITOR AMPAV40 7 SPEAKER OUTPUT 4 Ω Connection to the passive 4 Ohm external speaker is provided through a two pin terminal socket and comes fitted with removable screw terminal plug. The passive speaker becomes the right hand channel whilst the left channel is the active speaker. Connect the supplied …

12, ENGINEERED BY AUSTRALIAN MONITOR Address: 1 Clyde Street, Silverwater, Sydney NSW 2128 Australia. Private Bag 149, Silverwater NSW 1811 ACN 007 573 417 Website: www.australianmonitor.com.au International enquiries email: [email protected] DISTRIBUTED IN AUSTRALIA AND NEW …

4, 1 5.25” BASS DRIVER 2 0.5” DYNAMIC TWEETER 3 1.0” PIEZO TWEETER 4 BASS PORT PAGE 4 AMPAV40 INSTALLATION AND OPERATION MANUAL AMPAV40 FRONT PANEL – ACTIVE AND PASSIVE Grill removed 1 4 2 3 …