Autopage Telematics and Tracking Module Installation Manual

5, The C|3 has 2 data plugs that need to be connected correctly for the system to operate. These inputs are labeled and cannot be interchanged. These cables will control the alarm and remote start system as well as the data module if used. The cables can be interchanged but they need t…

8, Autopage Telematics and Tracking Module POWERED BY MOSHI® 960 Knox Street Unit B Torrance, California 90502 Main Office: 310-323-1800 Technical Support: 800 - 945 - 2527 …

6, The combinat ion antenna has two sets of coaxial cable coming from it. These are both marked with a tag that will identify the function of that wire. These cables cannot be interchanged and need to be attached correctly for operation. NEVER CUT or extend the antenna cables for any reaso…

3, complete tracking capabilities via any internet connected computer or cell phone, anywhere in the world. The system is based on a proprietary two-way digital communications protocol that allows complete encrypted communication between the security and remote start system, data mod…

7, given to the customer after the installation has been completed and the customer should be advised to keep this card in a safe place for future reference if needed. The software setup process can be accessed from an internet connected computer by visiting http://c3.gomoshi.co…

4, Please be sure that your data module is downloaded with the latest software and two-way protocol. • Never operate the C|3 when driving the vehicle. • Never leave small children or pets in an unattended vehicle. • Always install and test the remote starter or alarm system 100% befo…