Autostart AS-6210 Operation & User’s Manual

2, AS-6210 User Guide P. 2 Transmitter Part Number and Module Serial Number Transmitter Part Number: The installer is to write in the boxes below the Module’s serial number and the location of the Valet Switch. Module Serial Number: Valet Switch is located (if installed…

3, P. 3 User Guide AS-6210 Basic Remote Operation This system is equipped with a 5-button multi-channel two-way transmitter. It can operate two independent identically-equipped vehicles (see Multi-Car Operation for second-car transmitter functions). The functions of the tran…

5, Autostart AS-6210 P. 5 User Guide AS-6210 Remote Valet This feature will put your vehicle into Valet Mode using the remote transmitter instead of the Valet button as above. Note: Once the Electronic Valet is activated, the remote starter and Alarm features are disabled. To put the system into Valet…

7, P. 7 User Guide AS-6210 Shock Delete The shock sensor can be temporarily disabled. To temporarily disable shock and warn-away sense: • Press the TRUNK button and, within 3 seconds, • Press the STOP button. Shock senses will now be ignored until the next disarming of the sy…

1, H.4.30.S.1.00 DOC.1.00 CA TL – October 20, 2006 Manufactured in Canada by Autostart AUTOMATIC TRANSMISSION MULTI-CHANNEL REMOTE STARTER AND FULL-FEATURED ALARM SYSTEM _________________________________ User Guide Transmitter Part Number and Module Serial Number .........…