Avocent CCM Installer/user Manual

95, Avocent CCM Chapter 5: CCM Appliance Commands 79 Examples The following command sets a baud rate of 57600 and enables XON/XOFF flow control on physical port 2. >port 2 set baud=57600 flow=xonxof The following command adds a group named acctg3 to the configuration for virtual port VP1 (which w…

8, vi CCM Installer/User Guide Server SNMP command............................................................................................................ 93 Server SNMP Community command ........................................................................................ 93…

172, Installer/User Guide For Technical Support: Avocent Corporation 4991 Corporate Drive Huntsville, Alabama 35805-6201 USA Tel: +1 256 430 4000 Fax: +1 256 430 4031 590-434-501E Avocent International Ltd. Avocent House, Shannon Free Zone Shannon, County Clare, Ireland Tel: +353 61 715 …

38, 22 CCM Installer/User Guide For example, the following Telnet command connects to the serial device attached to physical port 4 of the CCM appliance. telnet 192.168.0.5 3004 If an authentication method other than None has been configured for the CCM appliance, you will be prompted…

49, Chapter 3: Operations 33 2. To display information about all users, issue a Show User command with the All parameter. SHOW USER ALL 3. To display information about group membership, issue a Show User command with the Group parameter. SHOW USER GROUP For more information, see Show Us…

9, Table of Contents vii Appendix F: Ports Used................................................................................................................. 147 Appendix G: Technical Support..................................................................................................…