Bajaj Electricals Pulsar 135 LS Operation & User’s Manual

24, Non-Use Maintenance 21 Non-use maintenance is necessary if a vehicle remains off road for a longer duration (more than 15 days**). The correct and careful non-use maintenance carried out before storing the vehicle will prevent the vehicle from rusting and from …

10, Location of Parts Right Handle Bar Switches E. Head Light Switch : It has 3 positions. : All lamps 'OFF'. : While engine running, Tail lamp, Meter lamp and Pilot lamp/s ‘ON’. : While engine running, Head lamp, Pilot lamp/s, Tail lamp and Meter lamps ‘O…

23, Bajaj Electricals Pulsar 135 LS Daily Safety Checks 20 Before riding the motorcycle be sure to check the following items. Please give proper importance to these checks and perform all of them before riding the motorcycle. If any irregularities are found during these checks, re…

20, Drive Chain Slackness • Chain top edge to be kept between the two marks during chain slackness adjustment. • Care should be taken, that the chain should never run dry. • Lubricate chain from outside with SAE 90 oil at every 500 kms. • Chain slackness …

9, 6 Left Handle Bar Switches A. Dipper Switch : When headlight is ON, High or Low beam can be selected with the dipper switch. Hi beam indicator light located on Speedo console will light up when high beam is selected. : High Beam : Low beam B. …

18, • Always wear helmets while driving or riding. Your helmets should conform to appropriate Indian standards. • Read thoroughly the instructions in this manual and follow them carefully. • Avoid unnecessary accessories for the safety of both rider and other mot…