CITROEN C5 Manual, Handbook

210, 207 INJECTION CHECKS : EXHAUST GAS RECYCLING CIRCUIT Engine : 4HX EGR valve - Connect tool [1] on the take-off (a) of the EGR valve capsule (2). - Apply a vacuum of approx. 0.6 bar to activate the EGR valve. - In abruptly suppressing the vacuum, the valve should click and lock itself back…

85, 82 ENGINE SPECIAL FEATURES : TIGHTENING TORQUES (m.daN) Engines : RHS - RHZ Tightening torques (13) 4.5 ± 0.5 (14) 5 ± 0.5 (15) 5 ± 0.5 (16) 2.7 ± 0.3 (17) 4.5 ± 0.5 (18) 2.1 ± 0.2 (19) 4.5 ± 0.5 (20) 6.1 ± 0.6 (21) 4.5 ± 0.5 (22) 5 ± 0.5 (23) 5 ± 0.5 B1BP27LP C5 …

78, 75 ENGINE SPECIAL FEATURES : TIGHTENING TORQUES (m.daN) Engine : XFW Cylinder head equipment Inlet manifold (32) Inlet manifold: Pre-tighten to : 0.4 Tighten to : 0.8 B1BK251D Respect the sequence of stages and the order of tightening C8 …

17, CITROEN C5 ALL TYPES 14 GENERAL CAPACITIES (in litres) Draining method. The oil capacities are defined according to the following methods. 1) - Vehicle on level surface (in high position, if equipped with hydropneumatic suspension). 2) - Engine warm (oil temperature 80°C). 3) - Draining of the oil s…

97, 94 ENGINE Engine type 6FZ RFN RLZ 3FZ XFX XFW RHY RHS RHZ RHW RHT 4HX 4HW C5 XXX X XXX X See pages : 96 98 100 to 103 C8 XXX XXX See pages : 97 97 99 104 to 105 AUXILIARY EQUIPMENT DRIVE BELT EW ES J4 D J4 J4 TD ATED ATED4 TED TED4 710129 10 12 C5 - C8 DW 106 to 107 108 to 109 …

281, 278 AXLES SUSPENSION STEERING AXLE GEOMETRY Setting at reference height (continued) Measuring rear height (H2)Measuring front height (H1) Rear height Front height H1 = R1 - L1 H1 = Measurement between the bottom of the subframe (b) at the front fixing of the suspension wishbone, …