Bay Networks 5393 Operation & User’s Manual

26, 119346-A Rev. A Release 5.1 Supplement for Remote Annexes 8 Bay Networks Vendor-Specific Attributes (VSAs) These attributes enable RADIUS to emulate the behavior of the ACP security regime: • Annex-Filter (VSA Bay Networks 28) • Annex-CLI-Command (VSA Bay Networks 29) • Annex…

47, 29 Release 5.1 Supplement for Remote Annexes 119346-A Rev. A Call Start The Remote Annex creates a log entry whenever a 5399, 5393, or RA6300 accepts an incoming call. In this case, Acct-Status-Type (40) = Call- Start [4]. The Remote Annex also includes the following attributes, when applicable,…

22, 119346-A Rev. A Release 5.1 Supplement for Remote Annexes 4 • radius_port_encoding - This parameter controls the format in which RADIUS accounting information is reported to the RADIUS server. The possible values for this parameter are device (the default) and channel. • radius…

7, Bay Networks 5393 vii119346-A Rev. A foregoing, Licensee, on behalf of itself and its subsidiaries and affiliates, agrees that it will not, without first obtaining all export licenses and approvals required by the U.S. Government: (i) export, re-export, transfer, or divert any such Software or techni…

35, 17 Release 5.1 Supplement for Remote Annexes 119346-A Rev. A Raw Outbound Service The Remote Annex is capable of allowing raw outbound access to a Remote Annex port via telnet. In order to use this feature, the user must either have no Service-Type (6) specified or have Service-Type (6) =…