Bay Technical Associates DS3 Owner's Manual

76, DS-SERIES OWNER’S MANUAL APPENDIX B 68 APPENDIX B MODEM COMMAND SUMMARY (Cont.) ROCKWELL CHIP SET MODEMS COMMAND INTERPRETATION ATS23=59 Fixed Serial Port Rate (default) AT&C1 Normal CD Operations (default) AT&D2 Normal DTR Operations (default) ATS0=1 Auto answer telephone line i…

24, DS-SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION 16 module. Load serial port communications software. Configure serial communications parameters for the host terminal to match the DS71 or DS71-MD2 module. The DS71 or DS71- MD2 modules have factory serial communications parame…

46, DS-SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION 38 NOTE: This header may appear different depending on type of module installed. From the selection menu, select #1, “Header,” followed by <cr>. The DS71 displays the current header status and asks if you want…

16, DS-SERIES OWNER’S MANUAL INSTALLATION 8 INSTALLATION UNPACKING Compare the unit and serial number of the equipment you received to the packing slip located on the outside of the box. Log this information on the sheet on page 61. Inspect equipment carefully for damage that may have occu…

5, TABLE OF CONTENTS v ABOUT THIS OWNER’S MANUAL iii INTRODUCTION TO THE DATA SWITCH 1 PROGRAMMABLE FEATURES OF THE DS SERIES 2 DS-SERIES QUICK START 5 EIA-232 SERIAL CONNECTION 5 OPERATION 5 DS SERIES MODULE CONFIGURATION 7 INSTALLATION 8 UNPACKING 8 PREPARING THE INSTALLATION SITE 8 POWER 9 C…

50, Bay Technical Associates DS3 DS-SERIES OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION 42 Enter the port to connect automatically, followed by <cr>. The DS71 or DS71-MD2 module stores the new settings in non- volatile memory and returns to the Auto Connect Port menu. Toggle Auto Connect Port feature b…