BC Biomedical USP-100A Operation & User’s Manual

4, 2 Manual USP-100A Copyright © 2006 www.bcgroupintl.com Made in the USA 10/06 Rev 02 NOTICE BC GROUP INTERNATIONAL, INC. RESERV…

7, BC Biomedical USP-100A 5 OPERATING PROCEDURE 1. Remove the top of the carrying case by unlatching the clamps located on two ends. The USP-100A is mounted on the base of the carrying case. 2. Place the USP-100A on a stable and level surface. Avoid air currents and mechanical vibrations. Level uni…

9, 7 Set Up: If you accidentally get into the Setup menu, you can get out by pushing the Tare/Menu-Cal - Exit button. The USP-100A Ultrasound Power Meter is a custom programmed balance with additional hardware (cone target, tank, etc.) designed to provide ultrasound power re…

3, 1 ULTRASOUND WATTMETER Model USP-100A TABLE OF CONTENTS Introduction .............................................................................................................. 3 Unpacking the USP-100A ...................................................................................…

10, 8 PROGRAMMING PRINT CONTROL The Print-1 submenu is used to set printing parameters for an external printer or computer. Output Set When Stable to On to print only when stable values. Set When Stable to Off to print stable or unstable values. Set GLP Tare to On to print GLP data once…