BEC 8800N Operation & User’s Manual

6, Express Internet Access The BEC 8800N series is compliant with worldwide VDSL/ ADSL standards, and supports download rates of up to 100Mbps using VDSL2, 12 / 24Mbps using ADSL2 / 2+, 8Mbps using ADSL and an upload rate of up to 50Mbps using VDSL2, 1Mbps using ADSL / ADSL2 / ADSL2+. The inte…

13, BEC 8800N Cabling One of the most common causes of problem is bad cabling or DSL line(s). Make sure that all connected devices are turned on. On the front panel of your router is a bank of LEDs. Verify that the LAN Link and ADSL line LEDs are lit. If they are not, verify…

49, selected in the IPv4 Protocol eld, default value 0.0.0.0 will display in this eld. WAN gateway IP Address: Enter your gateway IP address to the device provided by your ISP. If Fixed IP Address is selected in the IPv4 Protocol eld, default value 0.0.0.0 will display in this eld. Click N…

17, 13 5. Select Internet Protocol Version 4 (TCP/IPv4) then click Properties. 6. In the TCP/IPv4 properties window, select the Obtain an IP address au- tomatically and Obtain DNS Server address automatically radio but- tons. Then click OK to exit the set- ting. 7. Click …

20, 16 Conguring PC in Windows 95/98/Me 1. Go to Start > Settings > Control Panel. In the Control Panel, double-click on Network and choose the Conguration tab. 2. Select TCP/IP > NE2000 Compatible, or the name of your Network Interface Card (NIC) i…

12, The Rear Ports Port Meaning 1 Power Connect it with the supplied power adapter. 2 Power Switch Power ON/OFF switch. 3 USB Connect the USB cable to this port (BEC 8800N only). 4 Reset Press this button for 3~5 seconds to restore the device to its default mode. Note: Be sure that the devi…