BeefEater Discovery Series Assembly And Operating Instructions Manual

4, 4 Any enclosure with walls on all sides, but at least one permanent opening at ground level, and no overhead cover. A common example is an enclosed back yard. Typically, the walls are less than 3m high. If they are higher, there is a danger of gas build up. Within a partial enclosure th…

6, 6 The Discovery series of barbecues comes in both trolley-mounted and built-in models. These two pages contain information relating to setting up the built-in model only. General Requirements We recommend that this installation be done in a masonry structure and carried out by a pro…

17, 17 Warranty Model number Serial number Retailer purchased from Date of purchase Type of Gas LPG Natural Gas BeefEater Sales International visit our website: www.beefeaterbbq.com for details of your nearest BeefEater stockist, or e-mail: [email protected] SERVICE ASSISTANCE To assist y…

20, Your retailer can advise on the range of BeefEater accessories available to help you take full advantage of the barbecue cooking opportunities available with your roasting hood. Accessories Available BeefEater Sales International P.O. Box 236, Chester Hill, NSW, Australia 2162 Phone: +61 2…

13, BeefEater Discovery Series 13 Using Your Barbecue Controlling The Burners The control knob can now be turned to the desired heat setting, Low, Medium or High. The control knob does not need to be pushed in while selecting the heat setting. Preparing The Plates And Grills Your barbecue has heavy duty enamelled Cast Iron p…

5, 5 Installation Options Before proceeding, you need to establish the gas type which your barbecue will run on, and the style of installation you need. Natural Gas or LPG/Propane Before beginning installation or assembly, check that the gas type which the barbecue is designed for is correct for th…