Bell and Howell 500 FB Operator's Manual

4, SAFETY INFORMATION i SAFETY INFORMATION When using your machine, the following safety precautions should always be followed. R WARNING: Ignoring this warning could cause serious injury or even death. R CAUTION: Ignoring this caution could cause injury or damage to property. R Symbo…

18, SETTING UP THE SCANNER 1-3 CHECKING THE PARTS Make sure that you have all the parts shown below in your packing box. Scanner Power cord Terminator driver soft & manual Operator’s manual Parts list Name Q’ty Name Q’ty Scanner 1 Power cord 1 Terminator 1 driver soft & manual (ISIS) 1s…

55, Bell and Howell 500 FB SCANNER SPECIFICATIONS 5-4 SCSI II Interface The SCSI II connection is a standard SCSI II interface and requires a shielded high density 50-pin SCSI II bus and tag cable with an A Connector and a SCSI II port available on the host computer. The terminator is a standard SCSI II Terminator plug and…

56, SCANNER SPECIFICATIONS 5-5 Code Signal Pin DB<2> Data 28 DB<3> Data 29 DB<4> Data 30 DB<5> Data 31 DB<6> Data 32 DB<7> Data 33 DB<P> Data 34 GND Signal Ground 35 GND Signal Ground 36 RESERVED Reserved 37 TERMPWR* Term Power 38 RESERVED Res…

47, TROUBLESHOOTING 4-2 Document Feeder Raised This error indicates that the document feeder is raised. 1 Lower the document feeder cover, making sure it goes all the way down. Paper Jam This error indicates that an original is jammed in the document feeder. 1 Open the document feeder cover.…

63, SCANNER FEATURES A-4 Binary Scanning - Threshold Function Binary scanning converts every pixel included in the image to either black or white. When the image contains a gray area, the threshold value determines whether the scanner records the area as black or white. When the threshold value is h…