Beltronics Pro300 Owner's Manual

10, Beltronics Pro300 Bands BandsALL In this setting all radar, laser, and SWS frequencies are monitored. This is the factory setting, and it is highly recommended that you use your Pro300 in this mode. BandsMOD In this setting, Pro300 will warn you with an audible alert, and associated text message stat…

2, The BEL Pro300 is the most advanced radar, laser and safety detector ever designed by Beltronics. The BEL Pro300 includes full X, K, SuperWide Ka, and Safety Warning System radar capability, front and rear laser detection, digital signal processing (DSP) for superior range and reduced fals…

4, Radar Antenna and Laser Lens The rear panel of your Pro300 should have a clear view of the road ahead. For best performance, do not mount the Pro300 directly behind windshield wipers or tinted areas. Page 6 Alphanumeric Matrix Display Pro300’s display will show Highway, AutoSca…

15, Service 26 Service Procedure If your Pro300 ever needs service, please follow these simple steps: 1 Check the troubleshooting section of this manual. It may have a solution to your problem. 2 Call us at 1-800-341-2288. We may be able to solve your problem over the phone. If the probl…

1, U L T I M A T E R A D A R / L A S E R / S A F E T Y D E T E C T O R Owner’s Manual Beltronics 5442 West Chester Road West Chester OH 45069 USA USA 800.341.2288 www.beltronics.com ©2012 Beltronics Designed in USA • Manufactured In Canada Features, specifications and prices subject t…

7, Controls and Features 10 Power Connector Pro300’s power jack uses a telephone-type connector. This new 6-pin connector only works with the included coiled SmartCord, or the optional Direct-wire SmartCord. The coiled SmartCord is a special power cord that has a power-on i…