Bench KH 4438 Operating Instructions Manual

9, 9 system is activated. The digital data corresponding to a sound playback of 45 seconds is put into a read-ahead memory buffer. As soon as the memory buffer is full, which you can see on the bars in the memory display , it is overwritten with the next data (in turn also correspondi…

6, 6 8. Sudden temperature uctuations may cause condensate to form in the inside of the housing or on the laser scanner. Condensate may especially form when • the player is brought from a cooler into a warmer room or into a cold room that is suddenly heated • …

12, 12 Repeated playback of all CD songs Press the MODE button twice when playing a CD and ”REPT ALL” appears on the display. All of the songs of the CD inserted will be repeated until the STOP or MODE button is pressed once to change back to normal playback operation. MP3 CDs Note: The read in/…

8, Bench KH 4438 8 Charging and using rechargeable batteries Rechargeable batteries can be recharged in the player’s battery compartment in about 15 hours. The rechargeable batteries supplied should be charged before using them for the rst time. The same applies when the batteries have not been us…

11, 11 3. Press the SKIP button : or 9 to select the rst song for programming forwards or backwards. 4. Press the PROGRAM button again. The rst song selected is now programmed and the display shows ”P-02” for the second song to be programmed. 5. Repeat steps 3 and 4 to program ot…