Billion BiGuard 30 Operation & User’s Manual

90, 90 Mode: You can select Load Balance or Fail Over. Service Detection: Enables or disables the service detection feature. For fail over, the service detection function is enabled. For load balance, user is able to enable or disable it. Connectivity Decision: Establishes the number…

120, 120 interface if Auto is selected. Local: This section configures the local host. ID: This is the identity type of the local router or host. Choose from the following four options: WAN IP Address: Automatically use the current WAN Address as ID. IP Address: Use an IP address fo…

159, 159 Appendix E: Virtual Private Networking E.1 What is a VPN? A Virtual Private Network (VPN) is a shared network where private data is segmented from other traffic so that only the intended recipient has access. It allows organizations to securely transmit data over a public medium lik…

91, 91 Outbound Load Balancing on BiGuard 30 can be based on one of two methods: 1. By session mechanism 2. By IP address hash mechanism Choose one by clicking the corresponding radio button. Based on Session Mechanism: The source IP address and destination IP address might go thr…

119, 119 Connection Name: A user-defined name for the connection. Tunnel: Select Enable to activate this tunnel. Select Disable to deactivate this tunnel. Interface: Select the interface the IPSec tunnel will apply to. WAN1: Select interface WAN1 WAN2: Select interface WAN2 …