CLASSÉ AUDIO CDP-502 Owner's Manual

11, 11 MENU LOAD EJECTMENU CDP-502 Front Panel 1 Standby button & LED indicator e front panel Standby button will toggle the player between its fully operational status and a standby mode that leaves the player off , yet ready to respond to system commands via any of the supported cont…

36, CLASSÉ AUDIO CDP-502 36 If you prefer the display of the CDP-502 to remain on whenever not in standby, choose the never timeout setting. e lamp in the LCD display was designed for harsh automotive environments and will give you many years of reliable operation. If you plan to leave the unit on continuously, ho…

46, 46 Specifications All specifi cations are accurate at the time of printing. Classé reserves the right to adjust specifi cations without notice.  Frequency response (balanced and single-ended) 8 Hz – 20 kHz +0/-0.4dB  Distortion (THD+noise) 0.001%  Output voltage (single-…

21, 21 • Disc Menu presents the menu of available chapters, within whatever title you are watching at the moment. (See explanation of DVD menus in this section.) • Title gives you a list of available “titles” on the disc you are watching. (See explanation of DVD menus in this section.)…

44, 44 5. The screen shows an error message and the Eject button does not eject the disc (or the player shows some other anomalous behavior). 3 Press the Standby button so the screen dims and the blue light goes on. 3 Using the rear panel power switch, turn off the unit for at least thirty s…

2, 2 NOTICE All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to inform you that all Classé components have been offi cially approved for the European Community (CE) mark. is means that your Classé product was subject…