Bissell CleanView® Plus Vacuum with OnePass Technology™ 3918 Operation & User’s Manual

6, www.bissell.com 800.237.7691 Operations 6 Power switch The Power switch is located on the left side of the vacuum. Push the rocker switch "ON" (I) to vacu- um, and "OFF" (O) when cleaning is complete. Handle position Press the handle release pedal with your foot to place yo…

3, www.bissell.com 800.237.7691 IMPORTANT SAFETY INSTRUCTIONS 3 When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING UPRIGHT VACUUM Always connect to a polarized outlet (left slot is wider than right). Unplug fro…

12, www.bissell.com 800.237.7691www.bissell.com 800.237.7691 12 Clearing a clog Low suction or poor pickup may be due to a clog in the vacuum cleaner. If you notice a change in the sound of the motor or a reduction in the spinning action, check for clogs. 1. Unplug cleaner from electrical outle…

11, Bissell CleanView® Plus Vacuum with OnePass Technology™ 3918 www.bissell.com 800.237.7691 11 Maintenance and care Replace drive belt Use only a genuine BISSELL style 9 replacement belt (#203-1093) in your BISSELL CleanView vacuum. 1. Unplug cleaner from electrical outlet. 2. With rotating floor brush removed from vacuum cleaner (steps 1-4 of Check …

13, www.bissell.com 800.237.7691 13 Vacuum cleaner won’t turn on Possible causes Remedies 1. Power cord not plugged in 1. Check electrical plug 2. Blown fuse/tripped breaker 2. Check/replace fuse or reset breaker Vacuum cleaner won’t pick up dirt Possible causes Remedies…

9, www.bissell.com 800.237.7691 9 Maintenance and care WARNING: Do not operate cleaner with damp or wet filters or without all filters in place. Empty Dirt Tank The dirt tank needs to be emptied when the dirt reaches the “Full” line on the side of the tank. 1. Unplug cleaner from electrical o…