Bissell ProHeat Pro-Tech 7920 SERIES Operation & User’s Manual

17, 17 Routine Maintenance Slowly move the machine nozzle with Bare Floor Tool forward and back over soiled surface one time while pressing the trigger. Caution: Do not over wet. Repeat the motion without pressing the trigger using the Bare Floor Tool to squeegee and suction up the dirty water. Re…

12, 12 Stain Removal Do Not Delay! Failure to attend to an accident soon after it occurs may cause it to set and become permanent. Before treating any stain, follow these pre-treatment steps: Blot up liquids with an absorbent cloth or paper towels. White materials are recommended because cer…

4, Bissell ProHeat Pro-Tech 7920 SERIES 4 SmartMix ® Tank DirtLifter ® PowerBrush Floor Nozzle Window SmartTemp ® Ready Light ReadyTools Dial Lower Handle Belt Access Door Flow Indicator (Filter Inside) SmartMix ® Dial Flex Hose Power Cord Quick Release Tool Caddy SmartTemp ® Switch Tank-in- Tank ™ Power Switch Trigger Upper Handl…

9, 9 Remove Tank Lid by rotating handle forward to unlatch lid and lifting lid off tank. Pour out dirty water. After each use, remove and rinse the lint screen located on the tank lid. A. Remove tank assembly from unit. B. Remove tank lid. C. Remove any debris caught in lint screen. D. Re…

20, 20 WARNING: To reduce the risk of fire, electric shock or injury unplug from outlet before servicing. Troubleshooting SmartTemp Ready Light does not illuminate. Possible Causes Remedies The SmartTemp switch is not Turn on the SmartTemp switch. turned ON. The machine Power Switch…