Black Widow Security BW 6 Relay Installation Manual

5, Default Reset for User Programming Following this procedure will set only the User Programming Parameters to factory default settings. 1. Enter User Programming. 2. Press Transmitter Button 3. • The siren will chirp 6 times indicating the reset signal was received. • Only User Progr…

8, 8 © 2002, DAVID LEVY COMPANY, INC. 64-6RELAY, 6/02 Rev. 1 REVERSE POLARITY (ADDING ACTUATORS): REVERSE POLARITY USING FACTORY SYSTEMS: GROUND GREEN WIRE FROM ALARM GROUND BLUE WIRE FROM ALARM UNLOCK RELAY LOCK RELAY UNLOCK RELAYLOCK RELAY GREEN WIRE FROM ALARM BLUE WIRE FROM ALARM SWITCH LOCK…

7, 7 ® 4-BUTTON SECURITY TRANSMITTER OPERATION ARM/LOCK SILENT ARMING & DISARMING HOLD 3 SEC. FOR TRUNK BUTTON OPERATION ARM/LOCK - By pressing this button for 3 seconds for PANIC. UNLOCK/DISARM - By pressing this button for 3 seconds system is disarmed. TRUNK - SILENT ARMING &am…

4, Black Widow Security BW 6 Relay Valet Mode Allows you to temporarily disable the security system when the car is being service or turned over to a parking attendant. To turn Valet Mode on or off: 1.Turn on the ignition. 2. Press and hold the override switch for 3 seconds. • The siren will chirp once to indicate you have turned V…

1, BEFORE INSTALLING THIS PRODUCT PLEASE READ THIS INSTALLATION MANUAL THOROUGHLY!! INSTALLATION MANUAL Before Installing: • This product must be installed by qualified personnel according to these instructions and and observing all safety features. • Before mounting the product ch…