Black Widow Security BW 853 System Manual

4, 4 • BLUE/WHITE WIRE - Passenger unlock output (-) 500mA. The BLUE/WHITE wire provides a ground to unlock the passenger doors when the unlock button on the transmitter is pressed two times. To install the two-step unlock feature, the BLUE/BLACK and BROWN/BLACK wires must be run dire…

3, 3 Before you begin the installation: • This product must be installed by qualified personnel according to these instructions. • Verify with the customer the desired location for the program switch and LED. • Always use a multimeter when verifying vehicle wiring. Installation No…

6, 6 FACTORY DOOR LOCK RELAYS NOT USED NOT USED FACTORY DOOR LOCK SWITCH VIOLET BLUE/BLACK BROWN/BLACK VIOLET/BLACK GREEN/BLACK WHITE/BLACK (-) DOOR LOCK (-) DOOR UNLOCK HARNESS FACTORY DOOR LOCK RELAYS NOT USED NOT USED FACTORY DOOR LOCK SWITCH VIOLET BLUE/BLACK BROWN/BLACK V…

1, 1 SYSTEM MANUAL Full Featured Keyless Entry System with Optional Starter Defeat and Passive Immobilize Feature STANDARD FEATURES Some of the system’s standard features include: • Two 4-button remote transmitters • Remote keyless entry • LED Status indicator • Valet switch OPT…

2, Black Widow Security BW 853 2 PASSIVE STARTER DEFEAT If the optional starter defeat is installed, the system can be programmed to automatically disable the starter 45 seconds after turning off the ignition as an extra measure of security in the event the vehicle is accidentally left unlocked. During the 45 s…