Bostitch 651 SERIES Operation And Maintenance Manual

11, -11- TOOL OPERATION CHECK C AUTION: Remove all fasteners from tool before performing tool operation check. 1. CONTACT TRIP OPERATION: A. With finger off the trigger, press the contact trip against the work surface. THE TOOL MUST NOT CYCLE. B. Hold the tool off the work surface, and pull …

9, -9- TOOL OPERATION EYE PROTECTION which conforms to ANSI specifications and provides protection against flying particles both from the FRONT and SIDE should ALWAYS be worn by the operator and o thers in the work area when connecting to air supply, loading, operating or servicing this tool. Eye prote…

4, Bostitch 651 SERIES TOOL SPECIFICATIONS All dimensions in inches unless otherwise specified. -4- 651S5 Description 7/16” Crown Stapler Operation Pressure Range 70-120 PSI (4.9 to 8.43kg/cm 2 ) Fastener Type 16S5 & 17S5 Series Staples Fastener Gauge 16 & 17 Gauge Fastener Range 1” to 2” (25mm to …

6, -6- AIR SUPPLY AND CONNECTIONS D o not use oxygen, combustible gases, or bottled gases as a power source for this tool as tool may explode, possibly causing injury. FITTINGS: Install a male plug on the tool which is free flowing and which will release air pressure from the tool wh…

7, -7- LOADING THE 651 STAPLER EYE PROTECTION which conforms to ANSI specifications and provides protection against flying particles both from the FRONT and SIDE should ALWAYS be worn by the operator and others in the work area when connecting to air supply, loading, operating or servicing th…

13, AVAILABLE ACCESSORIES -13- 651-RB1 651 O-RING KIT TVA6 TRIGGER VALVE KIT PREMOIL-4OZ PREMIUM PNEUMATIC TOOL OIL 16S5 SERIES STAPLES VSA5 VINYL SIDING ADAPTER PRO-3850 & PRO-1450 PREMIUM POLYURETHANE AIR HOSE …