Bowflex ULTIMATE 2 Assembly Instructions Manual

17, Bowflex ULTIMATE 2 16 Assembling Your Bowflex Ultimate ™ 2 STEP 10 Parts: • Seat Rail Assembly • Base Assembly Tool: • Hex Key (7/32”) • Wrench (9/16”) - or Adjustable Wrench 10-1 Align holes on Seat Rail with holes in Rod Box Assembly. 10-2 Install and completely tighten the h…

18, 17 Assembling Your Bowflex Ultimate ™ 2 STEP 12 Parts: • Left Lat Boom • Rear Pulley Frame • Side Plate Tool: • Hex Key (3/16”) 12-1 Insert Lat Pulley Frame into holes in Left Lat Boom. Make sure the Pulley Frame Swivel is parallel to the planes A and B shown …

15, 14 Assembling Your Bowflex Ultimate ™ 2 STEP 6 Parts: • Base Assembly • Rod Box Tools: • Hex Key (7/32”) 6-1 Leave Base in folded position and tilt forward to gain access to bottom of Rear Base. 6-2 Place the Rod Box through Rear Base and align with holes in ba…

26, 25 STEP 26 Parts: • Seat Frame • Leg Extension Seat Pad Tool: • Hex Key (3/16”) 26-1 Align holes in Leg Extension Seat Pad and Seat Frame. 26-2 Install and completely tighten hardware. Hardware (1:1): 4 Button Head Screws (5/16” X 1”) 4 Washers (5/16”) Button Head S…

30, 29 Cable Installation STEP 4 a. Uncoil the Cable from Lower Pulley and remove the Ball Stop. (See Step 1/Figure A) b. Remove the Angled Pulley from the Rod Box, wrap the Cable under the Pulley and feed the Cable through the hole in the Rod Box. (See Figure A) c. Rep…