BOXLIGHT CD-454m Operation & User’s Manual

7, iii SAFETY INSTRUCTIONS Please read and follow all safety instructions provided BEFORE using your new projector. Failure to comply with safety instruc- tions may result in fire, electrical shock, or personal injury and may damage or impair protection provided by equipment. Please…

54, 46 Appendix Grid* ** FN-F2, choose auto or simultaneous FN-F2 Ctrl-Alt-Tab Ctrl-Alt-Tab Hitachi FN-F7 FN-F7 Honeywell FN-F10 FN-F10 Hyundai setup screen option setup screen option IBM 970* automatic warm reboot IBM ThinkPad** reboot, enter setup menu FN-F2 FN-F7, select choice fro…

39, 31 Ver t i c a l re f r e sh ra t e The time period that one video frame is displayed. Mute status Indicates if the audio is muted. Source Indicates the active source, Computer 1 analog, Computer 1 digi- tal, Computer 2, and Video. Software version Indicates the projector’s softwar…

15, 7 SETTING UP THE PROJECTOR 1 Place the projector on a flat surface. • The projector must be within 10 feet (3 m) of your power source and within 6 feet (1.8 m) of your computer. • If you want to project from behind a translucent screen, set up the projector behind your screen. See …

20, 12 Setting up the Projector F IGURE 8 Connecting the projector to a video player using an S-video cable and the audio cable and adapter NOTE: The audio adapter is provided so that the same audio cable used to connect a computer can be used with the adapter to connect a video player.…

46, BOXLIGHT CD-454m 38 Maintenance & Troubleshooting • Make sure your computer’s video board is installed and con- figured correctly. • Make sure your computer has a compatible video board. The projector isn’t CGA, EGA or SXGA compatible. If you’re using Windows 98: 1 Open “My Computer” ico…