TREND T5 Manual 

15, TREND T5 T5 -14- Beam Trammel Routing Cutting Arcs with the Router ■ Place the machine on the workpiece. ■ Set the cutting depth using the depth stop (2). ■ Fasten the fence rod (1) in the routing base (3) with the thumb knob (4). ■ Fit on the beam trammel point (5) as shown. ■ Measure the…

19, T5 -18- T5 - SPARE PARTS LIST v8.0 09/2005 No. Qty. Desc. Ref. 1 1 Stator Housing WP-T5/001 2 1 Top Vent Housing WP-T5E/002 3 1 Base Complete WP-T5/003 4 1 Lower Bearing Housing WP-T5/004 5 1 Spring for Revolving Guide WP-T5/005 6 1 Ball for Revolving Guide WP-T5/006 7 1 Machine Screw Socket M6 x…

13, T5 -12- Side-Fence Routing The side-fence is used to guide the router when moulding, edge profiling or rebating the edge of the workpiece or when routing grooves and slots in the centre of the workpiece, parallel to the edge. The edge of the workpiece must be straight and true. The cheeks are adjus…

6, T5 -5- ITEMS ENCLOSED 1 x Parallel side-fence with micro adjuster 1 x Fence rods (pair) 2 x Adjustable fence cheeks with fixing screws 1 x Collet 1 ⁄ 4 ” (6.35mm) UK & Eire 1 x Collet 8mm* UK & Eire, Europe 1 x Spanner (17mm A/F) 1 x Guide bush 20mm and fixing screws 1 x Beam…

2, -1- T5 Dear Customer Thank you for purchasing this Trend product, we hope you enjoy many years of creative and productive use. Please remember to return your guarantee card within 28 days of purchase. CONTENTS TECHNICAL DATA _____________________1 SAFETY ____________________________2-3 E…

16, T5 -15- Bearing Guided Cutters Ball Bearing Guided Cutters Edge profiling and shaping cutters are available with a bearing fitted to the end. This enables shaped or straight workpieces to be routed without the need for a guiding device such as a side-fence or batten. The edge must be free from …