Cabletron Systems KBU 64 Operation & User’s Manual

5, KBU 64 Rackmount Specification 80-10100001-09 1–1 1 KBU 64 Rackmount Specification 1.1 Introduction This manual describes the Rackmount version of the KBU64. The standalone KBU 64 has its own manual, Publication 80-10100000. For information on the command menus and parameters in the r…

10, Front and Rear Panels and Interfaces 80-10100001-09 2–3 2.2.1 Link Settings For all 3 types of Rear Interface Card the command port jumper settings are as follows: Without Manager Card With Manager Card Link Normal Polled Polled Only JP8 IN IN X JP9 OUT OUT X JP10 OUT IN X JP11 I…

13, KBU64 Rackmount User Manual 80-10100001-092–6 2.2.4 X21 Rear Interface Card The User and Link connectors are both 15 way 'D'. The pin assignments are as follows: Pin No. Circuit No. Signal Name Assuming configured as DTE 1 Ground Chassis Earth Common return 8 G Signa…

22, Installation and Power Supply Requirements 80-10100001-09 5–3 20mm x 5mm, 3.15AH,250V Anti-surge (T) type for 110V to 120V ratings. If any problems are encountered with fuses continually blowing the following alternative ratings maybe used: 20mm x 5mm, 3.15AH,250V Anti-surge (T) type for 220V t…

4, KBU64 Rackmount User Manual 80-10100001-09iv TABLE OF CONTENTS 1 KBU 64 RACKMOUNT SPECIFICATION 1–1 1.1 I NTRODUCTION 1–1 2 FRONT AND REAR PANELS AND INTERFACES 2–1 2.1 F RONT P ANEL 2–1 2.2 R EAR I NTERFACE C ARDS 2–1 2.2.1 L INK S ETTINGS 2–3 2.2.2 C OMMAND…

2, Cabletron Systems KBU 64 KBU64 Rackmount User Manual 80-10100001-09ii Publication — 80-10100001-09 Publication Notice: This manual has been compiled and checked for accuracy. However the information contained in this manual does not constitute a warranty of performance. Cabletron Systems Ltd. reserves the rig…