Cabletron Systems 9W006 Quick Start Manual

18, Cabletron Systems 9W006 M ODULE C ONNECTIVITY OVERVIEW The SmartSwitch Remote Access Module can communicate with various CyberSWITCH products in addition to other modules via a PPP connection. We will use an example configuration to describe how to set up an IP network with a SmartSwitch Remote Access Module and ot…

24, QUICK START 24 SmartSwitch Remote Access Module ADDING SITE R EM _1204 At the initial Site window, click on Add. We can now configure site properties and systems. Configuring Site Rem_1204’s Properties 1. Enter Rem_1204 as the Site Name. 2. Select Local User Table as t…

2, QUICK START 2 SmartSwitch Remote Access Module NOTICE You may post this document on a network server for public use as long as no modifications are made to the document. Cabletron Systems reserves the right to make changes in specifications and other information contained in thi…

15, 9W006 and 9W007 15 I NSTALLING THE M ODULE Installing and Launching SFVRA-CFG SFVRA-CFG database (which uses either MS SQL Server or MS Access) and the SFVRA-CFG application (which runs on a Windows 95 or Windows NT device). The SFVRA-CFG application is the interface to the dat…

9, 9W006 and 9W007 9 I NSTALLING THE M ODULE Hardware Installation HARDWARE INSTALLATION This section provides instructions for: • installing the 9W006/9W007 module in to a SmartSwitch 9000 • completing the module’s cabling In case you need to restart the module during…

20, QUICK START 20 SmartSwitch Remote Access Module 2. On the PC, execute the communication package to emulate a terminal (VT100). 3. You will be prompted for a login ID and a password. Enter admin for both. 4. To secure each system, change the default password. To change the password, ente…