Cabletron Systems CSX200 Operation & User’s Manual

8, Introduction to SPMA for the CSX200 and CSX400 1-2 HSIM-W6 and HSIM-W84 HSIM-W6 and HSIM-W84 The HSIM-W6 and HSIM-W84 are Wide Area Networking HSIMs (High Speed Interface Modules), which are similar to the CSX200/400 in that they provide LAN to WAN switching. They can be installed…

36, Cabletron Systems CSX200 CSX Bridge View 3-16 The Special Database Window Figure 3-7. Special Database Window The top of the Special Database window lists general information: Total Filters The number of Þlters available depends on the device. Each device has a Þxed number of Þlters which you can conÞgure and e…

28, CSX Bridge View 3-8 Accessing the Bridge Traffic View Window The Frames/Admin and Delta/Percentage buttons each let you choose one of the two display modes for the Bridge Port entries. The display mode visible on a button is the one not currently selected. Clicking on a button when the bu…

32, CSX Bridge View 3-12 The Bridge Status Window 3. Select the desired Bridge Port index number from the list. The port entry will display information for the newly selected port. The Bridge Status Window You can set or change the device time, date, name, or locationÑall of which display i…

82, CSX WAN Configuration 4-18 Configuring the Frame Relay Protocol Oper Status The operational status of the bridge network protocol. Opened indicates that the interface is operational for bridging. Not Opened indicates that bridging is not operational on this interface. Local L…