Cabletron Systems CyberSWITCH CSX150 Quick Start Manual

26, QUICK START 26 CyberSWITCH LOCAL UPGRADE OF THE SECOND STAGE BOOT (SSB) To locally upgrade the second stage boot (SSB), follow these steps: 1. Restart the CyberSWITCH. 2. When “Waiting for Commands:” appears on the system screen, enter the following command: recover 3. W…

39, Small Office Remote Access Switch 39 C ONNECTIVITY Connecting One Cabletron Product to another via PPP c. Under AppleTalk Port Information, configure a WAN UnNumbered port: • Select the WAN UnNumbered port type. d. Under AppleTalk Static Routes, configure a static route to Remote: �…

41, S PECIAL F EATURES CONFIGURING THE POTS OPTION The dual-line, Plain Old Telephone Service (POTS) feature allows one or both of the ISDN B- channels to alternatively be used with traditional phone equipment, including faxes and answering machines. The CyberSWITCH can use both B-channels …

46, Cabletron Systems CyberSWITCH CSX150 QUICK START 46 CyberSWITCH * On DMS-100 and NI-1 switches, more than one data link is possible. •The CH-1 and CH-2 indicators signify activity along their respective B channel: SERVICE INDICATOR The Service indicator is the only indicator that is red. It comes on normally during …

6, QUICK START 6 CyberSWITCH Connectivity 32 Overview 32 Connecting One Cabletron Product to another via PPP 32 Bridge to Bridge Configuration 32 Configuration for Site "Central" 32 Configuration for Site "Remote" 33 IP Router to IP Rout…

42, USER’S GUIDE 42 CyberSWITCH CONFIGURING POTS LINE INFORMATION To use the POTS feature, you must configure a POTS line. POTS line information includes: the POTS line jack Id, the primary phone number (optional), and customization information (also optional). The section below describ…