Cabletron Systems TRXMIM-24A Operation & User’s Manual

49, PORT - Port Status Page 4-7 4.2.7 PORT - Port Status This LED indicates the status of the connection at the TCU. If at power-on, the LED for any port is: RED, the port is disabled. At power on, all ports are looped back (disabled) until the module comes out of bypass mode and returns to normal …

1, CABLETRON SYSTEMS, P. O. Box 5005 Rochester, NH 03866-5005 The Complete Networking Solution ™ TRXMIM TM USER’S GUIDE MODELS 22A, 24A, 42A, 44A …

10, USING THIS MANUAL Page 1-2 1.1 USING THIS MANUAL Prior to installing and operating the TRXMIM, please read through this manual completely to become familiar with its contents and with the features of the TRXMIM. If you are not familiar with port switching and four-ring FNB ap…

17, Support for Passive MAU Workgroups Page 1-9 Figure 1-5. Improved Beacon Recovery Resolution for MAUs (8 Stations) (8 Stations) (8 Stations) (8 Stations) TRXMIM Ring Out Ring Out Ring Out Ring Out Multi-Station Access Units Ring In Ring In Ring In Ring In When each MAU is indivi…

30, Ring Speeds Page 2-9 Each RJ-45 connector is encased in a metallic shield which provides a means of connection for the STP cable shield. When STP patch cable is used, shield continuity is maintained by contacts within the female RJ-45 that contact the metallic casing of the male RJ-45 …

13, Cabletron Systems TRXMIM-24A Port Assignments and Port Switching Page 1-5 port-switching TRXMIM, Cabletron Systems offers alternative solutions. Figure 1-2. FNB ring 1 segmented to form two LANs With Port Switching When controlled by a management module which supports port switching, TRXMIMs and oth…