© Copyright 2011 Optoma Technology, Inc. DLP
®
and the DLP logo are registered trademarks of Texas Instruments. All other trademarks are the property of their
respective owners. All specifications subject to change at any time.
www.optomausa.com
Datasheet – TX565UST-3D
* Lamp life is dependent upon many factors, including lamp mode, display mode, usage, environmental conditions and more. Lamp brightness may decrease over time.
**3D content can be viewed with active LCD shutter glasses when the projector is connected to a computer with a compatible 3D graphics card.
Projector Expert
TX565UT-3D
− Ultra Short Throw Projector
Bring Presentations and Lessons to Life
Optoma’s TX565UT-3D brings together high brightness and contrast with 3D
capabilities to allow presenters and educators to deliver sharp, crystal-clear images
and bring content to life. Sophisticated optics technology allows the projector to be
placed above and just inches from a whiteboard, screen or wall to reduce on-screen
shadows and eye glare. Meanwhile, the sleek and sophisticated design provides
streamlined installation.
Features
Ultra short throw design minimizes shadows
3D-capable via DLP® Link™ technology – Up to 720p resolution**
Natively-embedded Crestron RoomView® delivers built-in connectivity and control
Powerful audio – Built-in 10-watt speaker system
Environmentally-friendly design uses less than 0.5 watt of power in standby mode
Display Technology
Single 0.55" DC3 DMD DLP by
Texas Instruments
Native Resolution
XGA (1024x768)
Maximum Resolution
UXGA (1600 x 1200)
Brightness (Typical)
2500 ANSI Lumens
Contrast Ratio
3000:1 (Full On/Full Off)
Lamp Life and Type*
4000/3000 Hours (STD/Bright)
230W P-VIP
Throw Ratio
0.38 (Distance/Width)
Projection Distance
18.5” to 25.8“ From Projector Mirror
to Screen
Image Size (Diagonal)
63” to 85” (1.96m to 2.16m)
Aspect Ratio
4:3 Native, 16:9 Compatible
Offset
128%
Displayable Colors
1.07 Billion
Uniformity
85%
Audio
Two 5-Watt Speakers
Variable Audio Out
HDMI Audio Pass-Thru
Noise Level (STD/BRIGHT)
30dB/32dB
Remote Control
IR Remote with Mouse Control
Computer Compatibility
UXGA, WXGA, SXGA+, SXGA, XGA, SVGA,
VGA Resized, VESA, PC and Macintosh
Compatible
Video Compatibility
NTSC, PAL, SECAM, SDTV (480i), EDTV
(480p), HDTV (720p, 1080i/p)
3D Compatibility**
120Hz Frame Sequential 3D for
Resolutions Up to 720p, 60Hz Field
Sequential 3D for Resolutions Up to 480i
Monitor Loop Through
D-Sub 15 pin VGA Output (Functional in
Both Normal and Standby Modes)
Projection Lens
F=2.71, f=4.423mm, Manual Focus
Digital Zoom=0.8~2.0
Closed Captioning
Enabled Via On-Screen Menu
User Controls
Complete On-Screen Menu Adjustments in
26 Languages
I/O Connectors
HDMI v1.3, Two VGA-In, VGA-Out,
S-Video, Composite Video, RCA Stereo
Audio-In, Stereo Audio-In, Stereo
Audio-Out, Microphone-In, 12v Trigger,
RJ45 and RS-232
Security
Kensington® Lock Port, Security Bar and
Keypad Lock
Projection Method
Front, Front Ceiling, Rear, Rear Ceiling
Weight
16.76 lbs (7.6kg)
Dimensions (W x H x D)
16.8” x 8.27” x 16”
(426.5 x 210 x 407 mm)
Horizontal Scan Rate
15.3, 30 - 91.1 KHz
Vertical Refresh Rate
24 – 85, 120 Hz
Operating Temperature
41 to 104°F (5 to 40°C), 85% Max Humidity
Power Supply
AC Input 100-240V, 50-60Hz,
Auto-Switching
Power Consumption
330 Watts (Bright), 255 Watts (STD),
14 Watts (Active Standby), <0.5 Watt
(Standby)
Standard Accessories
AC Power Cord, VGA to VGA Cable,
Remote Control, Batteries for Remote,
Multilingual CD-ROM User’s Manual, Quick
Start Card and Warranty Card
Optional Accessories
HDMI Cable, Microphone, Component to
VGA Cable, Composite Video Cable,
RS-232 Cable and Panoview™ Series
Screens, DLPLink 3D glasses, 3D scaler
box
Warranty
3-Year Optoma Express Replacement
Service, 1-Year Lamp
UPC
796435 41 750 5
Specifications
