Cambridge SoundWorks Model 12 Instructions Manual

11, A fuse protects the amplifier inside the BassCube subwoofer. If the fuse blows, it is safe to replace it with a spare 2A, 250V fuse using a screwdriver (see below). If the second fuse blows, do not attempt Difficulty? If you suspect a problem with your BassCube subwoofer, contact the stor…

10, • These optional filters can be connected at either end of the speaker wires of your Left and Right Main speakers. 1) You can connect a filter’s INPUT FROM AMP wires to speaker outputs on your receiver or amplifier, then reconnect the main speaker wire to the filter’s OUTPUT…

3, READ INSTRUCTIONS - All safety and op- erating instructions should be read before the BassCube subwoofer is operated. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference. HEED WARNINGS - All warnings on the BassCube subwoofer and in the operat-…

1, Safety Precautions ............................................................................ i, ii Introduction ........................................................................................ 1 Unpacking ...............................................................................…

12, Cambridge SoundWorks Model 12 Limited Warranty ® Dolby, Pro Logic and Dolby Digital (AC-3) are registered trademarks of Dolby Laboratories Licensing Corporation ™ Tower and Model Seventeen are trademarks of Cambridge SoundWorks, Incorporated ® Ensemble, Ambiance and Cambridge SoundWorks are registered trademarks …

4, B ass drums, organs, and electronic synthesizers produce extremely low frequency sounds. But traditionally, few home loudspeakers are designed to reproduce bass below about 50 Hz. Today, however, home loudspeak- ers are called upon to reproduce more than music: in home theater systems, the…