Cambridge SoundWorks P460 Reference Manual

186, Cambridge SoundWorks P460 Chapter 2 Avaya P460 CLI Commands 176 Avaya P460 Reference Guide Example: P460-1> show system-log P460-1(super)# sh system-log --type q to quit or space key to continue-- *** UpTime : 0:37:19 *** *** MODULE : 1 *** System log file: H+n.AgDwZZioHgDZZZZ.(ioHgD3D3wD"bZZ.onD<ZZ2oAgD…

88, Chapter 2 Avaya P460 CLI Commands 78 Avaya P460 Reference Guide set interface inband User level: read-write, admin. Use the set interface inband command to configure the inband interface on the Supervisor Module. The syntax for this command is: set interface inband <vlan> &l…

27, Chapter 2 Avaya P460 CLI Commands Avaya P460 Reference Guide 17 clear dynamic vlans User level: read-write, admin. Use the clear dynamic vlans command to clear dynamically learned VLANs. Only the VLANs learned by the switch from incoming traffic are cleared using this command. The synta…

94, Chapter 2 Avaya P460 CLI Commands 84 Avaya P460 Reference Guide The syntax for this command is: set outband negotiation {enable | disable} Example: set outband speed User level: read-write, admin. Use the set outband speed command to configure the speed of Ethernet Console port. In auto negotiat…

124, Chapter 2 Avaya P460 CLI Commands 114 Avaya P460 Reference Guide variable The syntax for this command is: set system location [string] Example: If you wish to enter a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”. set system name U…

220, Glossary 210 Avaya P460 Reference Guide SNAP SubNetwork Access Protocol. Internet protocol that operates between a network entity in the subnetwork and a network entity in the end system. SNAP specifies a standard method of encapsulating IP datagrams and ARP messages on IEEE networks. SNMP …