COMPRO T750F - STARTUP Manual 

10, 10 Continue An y wa y Software Installation After installing the PCI card and cables in your computer, you should restart it and follow these steps to install the software. Step 1. After restarting, Windows will detect your VideoMate Vista T750F PCI card and start th…

22, 22 When Autoscan is finished, detected channels are automatically enabled and marked with the green check mark . Channels, where a valid signal could not be detected, are disabled and marked with a blank. However, you can interrupt the scanning process by pressing the Stop button. …

6, COMPRO T750F - STARTUP 6 VideoMate Vista T750F Connectors Item Function Description 1 DVB-T In Connect to a digital TV antenna 2 TV In Connect to a analog TV cable feed 3 FM In Connect to a FM antenna 4 Audio In Use audio cable connect to VCR,DVD, or V…

9, 9 10. Insert VideoMate Vista T750F PCI card in an open PCI slot. Compro recommends installing the card in the third or fourth PCI slot away from the AGP slot This completes the hardware installation. Please read the following notes and proceed to install the software. Note For best…

1, VideoMate Vista T750F PCI Tuner Card Start Up Guide Compro Technology, Inc. www.comprousa.com …

20, 20 ComproDTV 4 Control Panel The ComproDTV 4 control panel resembles the controls on a VCR. Please note that not all options are available at all times, and may be grayed out or inaccessible depending on your hardware setup and TV services available. The following figure gives you th…