CARVIN 822 Manual, Instructions

SPEAKER CABLES
The PH50 is our standard cable when purchasing a complete sound system.
These cables feature 1/4” plugs and heavy 16 gauge copper wire.  The PH50 is
adequate for lengths up to 50’ under normal use.  You can DAISY-CHAIN up to one
additional speaker per cable by using the unused 1/4” OUTPUT” jack (right side)
on your speaker jack plate.  Be sure to note the total impedance to the amp so it is
not lower than it’s recommended impedance.  See
Typical Loudspeaker Impedance
Configurations. 
PRECAUTIONS
1)  DO NOT EXCEED THE POWER RATING marked on the rear connect plate.
Excessive power will destroy drivers.  2)  DISTORTION from power amps will destroy
drivers much faster than clean power.  3)  WATER, MOISTURE, and DUST are
harmful to drivers causing failure which is not covered under warranty.  
WARRANTY
CARVIN loudspeakers are covered by a ONE year limited warranty unless
otherwise stated.  Warranty coverage is limited to original manufactures defects
only.  WARRANTY DOES NOT COVER: 1) Opened or burned voice coils.  2) Torn
cones caused by improper packing or abuse.  3) Damage from rain, moisture, ETC.
When returning defective driver(s), remove them from the enclosure to reduce
shipping costs .  DO NOT stuff paper into the driver(s).  Return pre-paid by UPS.
Include your address and description of the problem.  Your driver(s) will be returned
COD for the cost of shipping and reconditioning if not covered under warranty.
MODEL 822 SPEAKER SYSTEM SPECS:
Frequency Response: 80 Hz to 16 kHz ±3 dB
Useable Low Frequency: 50 Hz (-10 dB)
Power Handling: 300 watts Continuous Power
Recommended Amp: 50 to 300 watts
Sensitivity: 99 dB SPL
Coverage Angles: 90° Horizontal, 45° Vertical
Nominal Impedance: 8Ω
Horn Driver Protection: Yes
Connectors: One input & one output 1/4" phone connector
Woofer Enclosure Type: Computer Optimized Vented Box
Enclosure Covering: Duratuff II™
Dimensions: 17.5"W x 12"D x 22"H
Net Weight: 31 lbs.
Warranty: One Year
Options: Cover: CVS822, Stand: SS20 or SS30
822 FREQUENCY RESPONSE 
CARVIN ENGINEERING DATA 822 SPEAKER SYSTEM INSTRUCTIONS
822
Congratulations on your selection of the 822 12“ 2-way loudspeaker.  The 822 is
ideal for use in small clubs or halls as a sound reinforcement loudspeaker.  The 822
includes a built-in recessed bracket for the convenience of adding a speaker stand.
With 300 watt power handling, the 822 is an excellent choice when portability and
performance are of equal importance.
RECEIVING INSPECTION
INSPECT YOUR SPEAKER FOR ANY DAMAGE which may have occurred during
shipping. If any damage is found, please notify the shipping company & CARVIN. 
SAVE THE CARTON & ALL PACKING MATERIALS.  In the event you have to re-ship
your unit, always use the original carton and packing material. This will provide the best
possible protection during shipment.  CARVIN and the shipping company are not liable
for any damage caused by improper packing.  
SAVE YOUR INVOICE.  It will be required for warranty service if needed in the future. 
SHIPMENT SHORTAGE.  If you find items missing, they may have been shipped
separately.  Please allow several days for the rest of your order to arrive before inquiring.
RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this
manual for your records.  Keep your portion of the card and return the portion with your
name and comments to us.
SUGGESTIONS FOR OPTIMAL PERFORMANCE
Raise the enclosure to the ear level of your audience for greater coverage.  To
help control feedback, use a graphic equalizer.  Keep the speakers in front of the
microphone.  Never direct the microphone towards the speaker. For greater
coverage, add a second speaker system 20° to 30° off axis.
TYPICAL LOUDSPEAKER IMPEDANCE CONFIGURATIONS
Individual speaker or speaker cabinet wiring examples for total impedance.
For your records, you may wish to record the following information.
Serial No._____________________  Invoice Date_______________

SERIES CONNECTION
16Ω TOTAL IMPEDANCE
+
+
+
PARALLEL CONNECTION
4Ω TOTAL IMPEDANCE
+
+
+
 8Ω TOTAL
IMPEDANCE
SERIES/PARALLEL
CONNECTION
8Ω TOTAL IMPEDANCE
+
+ +
+
+
+
+
8Ω
8Ω
8Ω
8Ω
8Ω
8Ω
8Ω
4Ω8Ω
8Ω
16Ω8Ω8Ω

REAR CONNECT PLATE
Two professional twist-lock SPEAKON™
connectors and two standard 1/4” phone
jacks are featured.  Use these connectors
for connecting to the power amp and daisy
chaining to an additional speakers.
12340 World Trade Drive, San Diego, CA  92128
(619) 487-1600   (800) 854-2235
www.carvin.com

• 
  Aiphone GFA-DES

  Aiphone Reference Book: GFA-DES (#HFVBH3)

  GFA-DES, 2, aiphone/gfa-des.pdf

• 
  Allworx 9224

  #UFJ64A: 9224 Guidance

  9224, 10, allworx/9224.pdf

• 
  Audiovox Prestige APS-2K4MS

  #S43765: Prestige APS-2K4MS Instruction

  Prestige APS-2K4MS, 6, audiovox/prestige-aps-2k4ms.pdf

• 
  NuTone 770F

  #DGD3U6: 770F Guide

  770F, 13, nutone/770f.pdf

• 
  OneAccess ONECell 25

  OneAccess Network Router Manual (#7KR3G2)

  ONECell 25, 24, oneaccess/onecell-25.pdf

• 
  Sennheiser HMD 280 -

  Sennheiser User Guide Cable Box HMD 280 - (#UN65BU)

  HMD 280 -, 1, sennheiser/hmd-280.pdf

• 
  Xantech CSPLCD39RMP

  #M196V5: CSPLCD39RMP Handbook

  CSPLCD39RMP, 3, xantech/csplcd39rmp.pdf

• 
  Craftsman 26462_0

  User Manual (26462_0, #T8A9DZ)

  26462_0, 22, sears/26462-0.pdf

• 
  Rotel RDV-1092

  DVD Player RDV-1092 Guide, #29412T

  RDV-1092, 83, rotel/rdv-1092.pdf

• 
  Paradigm CI Home Series

  Paradigm User Manual: CI Home Series (#7SH5CP)

  CI Home Series, 28, paradigm/ci-home-series.pdf

• Search YouTube Videos for CARVIN 822 Device
• Search Google for CARVIN 822 Information
• Search Photo of CARVIN 822 in Google Images
• Search Twitter for CARVIN 822 News